карта на сайта
+359 878 738 277
Pneumatic actuators and drives
The whole spectrum of pneumatic actuators is available for constructors, designers and mechanics from every branch of the industry. The range is supplemented by а special customer solutions made especially for specific tasks and working conditions.
Parker
According to: ISO 6432 / ISO 15552
Single and double-acting
Bore sizes: 10mm to 320mm
Stroke lengths: to 2500mm
Working temperature: - 40 до +150°C
Working pressure: max 10 bars
Parker
According to: ISO 21287 / ISO 15524
Single and double-acting
Bore sizes: 12mm to 100mm
Stroke lengths: 1 to 500mm
Working temperature: - 40 to +120°C
Working pressure: max 10 bars
Parker
Bore sizes: 10mm to 80mm
Stroke lengths: to 41meters
Working temperature: - 40 to +120°C
Working pressure: up to 8 bars
Max speed: 30 m/s
Modular, service intervals up tp 7000km, ATEX versions
Parker
Double-acting
Max. Torque: up to 276 Nm
Rotation angles: 90°, 95°, 96°, 100°,180°,186°, 220°, 270°, 275°, 280°, 366°
Temperature range: - 20 to +80°C
Working Pressure: up to 10 bars
ATEX versions.
Parker / AirWork
Bore sizes: 10mm to 100mm
Stroke lengths: 10 to 200mm
Working temperature: - 20 to +150°C
Working pressure: up to 10 bars
Parker / Artec
Single and Double-acting
Bore sizes: 10mm to 200mm
Working temperature: - 20 до +150°C
Working pressure: up to 10 bars
ATEX / FDA certified versions.
ATEX / FDA certified versions. Parker / Artec
Single and Double-acting
Bore sizes: 10mm to 200mm
Working temperature: - 20 до +150°C
Working pressure: up to 10 bars
ATEX / FDA certified versions
